www.images-magazine.com 60 images NOVEMBER 2026 BUSINESS DEVELOPMENT Stella boxes like a teenager at the school disco, I observed what I refer to as ‘The Dance’. This is the set series of actions that are performed after pressing ‘Last Piece’ or ‘Outlet Mode’ as the job of 50 pieces comes to the end of its mammoth fourand-a-half-minute spell on press. I observed from my wallflower position as wordlessly, without instruction and under no obvious direction, the team removed the old ink and screen, passed them to the floating facilitator, loaded in new screens, and counted and checked the stock for the outgoing job and the incoming one. The printer set the After a cheap €30 Ryanair flight from Manchester to Zagreb, Croatia’s capital in the northwest of the country, a short drive north took us across the border into neighbouring Slovenia. The brief for this visit was familiarly simple: find any bottlenecks, help with substrate changes and fine-tune the pre-registration system. As is customary when I arrive in a shop, I put my boots on the ground and I absorb, through a weird kind of printer’s osmosis, the sights, the smell of shirts cooking in the dryer, the feel of the heat from the flashes and the slight stickiness of the floor. Here is one of the best parts of the job. It really is my theatre, where I can comprehend the small nuances of a working print operation, and as I began my initial assessment, something became abundantly clear. Nothing was wrong. The back story First of all, let’s cover some technical background. The client is a longestablished operation with three MHM automatic presses, a self-contained screen department using Newman roller frames (again!), with auto reclaim, CTS (computer-to-screen) imaging and auto coat. The three presses were the focus of my attention. Anyone who knows me knows I love the pin registration system on the MHM brand, and when we tie up the art department, the stencil department and the physical calibration of the presses, we can achieve huge time-savings on set-up. This company had recently upgraded from a fully automatic, auto-reg, allsinging-and-dancing Synchroprint 3000 (this was the first MHM I ever got my hands on, in the long-distant days of 1997) to a newer tablet-controlled MHM S-Type. An older S-Type nestled alongside this new addition and was consistently producing great prints despite being a little older than normal (2008). The third press was another S-Type, reconditioned and newly installed. The imaging was done using a retrofitted M&R i-Image S, and all the reclaim was handled by three Grünig G-Wash 112 machines. The company has transitioned from producing high-end sim-process specialist photorealistic prints to much more commercially viable workwear, with vector-based logos averaging fewer than four colours, and run sizes below 50 pieces. Now, with all this equipment, most of which was designed to reduce downtime, we should have a well-run organisation. And we did. Keep watching Watching the changeover from a safe distance, hidden behind some Stanley/ This month we find Tony Palmer in Slovenia trying to discover why even though a print shop’s ‘dance’ was toe-tappingly perfect, its pre-reg system wasn’t scoring a perfect 10 T ny’s travels Tony calibrating the press at the print shop in Slovenia Hannibal Printing has three MHM automatic presses of varying ages Mario Pleteršek and Klara Steinbacher of Hannibal Printing with Tony
RkJQdWJsaXNoZXIy MzY5NjY3